[China Glass Net] The reason for the bursting of the gas cooker glass panel is that there is a problem with the quality of the tempered glass itself;
Two: the stove is not flat when installed, causing the panel to burst;
Three: After a period of use, the burst caused by the deformation of the burner.
To avoid bursting, consumers should ask professionals during the installation process, and secondly, they should protect the stove. According to national regulations, the use of bottled liquefied gas and natural gas stoves has a life of 8 years. After the specified period of time, the internal parts of the cooker will age, so a new cooker should be replaced. If a burst occurs, consumers should protect the site and ask professionals to determine the cause of the burst.
First: the stove of the iron fire cover, due to the long time, the fire cover rusted, the rust point blocked the vent hole of the fire cover for a long time, resulting in the flame can not be burned out, the solution: often clean the fire cover, when cleaning the stove Do not only wipe the panel, and always treat the dross and rust spots in the firearm.
Second: the opening size of the countertop is larger than the opening size of the cooker. Because it is too large, the place where the cooker is stressed is not the position of the metal shell, but the glass panel. The force of long-term suspension easily causes the cooker panel to burst. Solution: Be sure to first determine the cooker, open the hole in the cabinet, how big the cooker will open the larger hole. Third: the user puts the high temperature directly on the panel, such as the wok that has just been used, the kettle that has just been burned. And other objects. Solution: Users should pay attention to themselves, do not put high temperature things on the glass panel immediately.
Fourth: the stove, the cooker joint, the gas pipe or other parts leak, the gas leaking out causes the local high temperature of the cooker to burst. Solution; Regularly check the gas valve, check the gas interface regularly, and replace the pressure reducing valve of the liquefied gas regularly. The pipe used for installation should choose the bellows with steel wire.
Fifth: the firearms, also known as the fire cover, did not put the seams after cleaning, causing the firearms to temper for a long time, or fire from the cracks. This will not only cause the panel to be fried, but also easily deform the firearm. Solution: After cleaning the fire cover, be sure to put it back as it is, and do not let the gap between the fire cover and the seat.
To put it bluntly, it is necessary for the user to use it carefully, but the user does not understand, this requires the guide to sell the product after the last link is to tell the user the above details. Also, do not save the cost of accessories when installing, be sure to use high quality pipe to avoid small loss
Mens Long Sleeve Shirt,Floral Men Shirt,Polyester Sublimation Printed Shirt,Check Shirt For Boys
ShaoXing City Silversilk Garments CO.,LTD , https://www.silversilksuits.com