[China Glass Network] Nowadays, many glass doors are used in many buildings. Therefore, different glass doors should pay attention to the installation problems when they are used. Of course, different families should pay attention to the glass when installing the glass door. The choice of the door.
First, the aluminum alloy door . Aluminum alloy doors have swing doors, sliding doors, hanging doors, folding doors, and the like. The aluminum alloy door has beautiful appearance and grades; it has high wind pressure resistance and good watertight performance; good sealing performance, light weight, high strength and strong corrosion resistance; double-layer insulating glass is not easy to be damaged.
1, choice: aluminum alloy door can not see the price, depending on the thickness of aluminum alloy, glass, accessories, etc., comprehensive selection of cost-effective products, some people only look at the price, some people only look at the brand, in fact, look Anything that is not desirable, cost-effective, and suitable for your own home is better.
Select the sliding effect of the sliding door. In some cases, choosing an item requires a sense of a professional perspective. Be careful about the feelings of sliding. People often fall into a misunderstanding that the sliding door is lighter and better when it slides. In fact, this view is wrong. A high-quality sliding door should not be too light or too heavy when sliding. With a certain weight of the door, there is no vibration when pushing and pulling, smooth and textured. Some sliding doors are lighter to push and pull, but there is a feeling of "floating" out, not smooth enough.
2, installation: unpacking inspection of aluminum alloy doors and windows, remove the wrapping cloth around the window frame, check the model according to the drawings, check the appearance quality and the flatness of the surface, if there are ridges, corners and warpage, In case of serious over-standard, serious damage, large color difference, etc., it should be consulted and resolved by relevant personnel, and can only be installed after being qualified.
Installation position of wall thickness direction: According to the width of the outer wall and the width of the window sill, determine the installation position of the aluminum alloy doors and windows in the wall thickness direction; if the thickness of the outer wall is deviated, in principle, the exposed size of the same room sill should be the same. As a matter of course, the window sill should extend 5mm below the window of the aluminum alloy window.
The anti-corrosion treatment on both sides of the door and window frame shall be carried out according to the design requirements. If the design does not require it, it can be coated with anti-corrosion materials, such as rubber-type anti-corrosion coating or polypropylene resin to protect the decorative film. It can also be adhered to the plastic film for protection, avoiding the joint cement mortar directly contacting the surface of the aluminum alloy door and window, resulting in electrochemical reaction. , corrosion of aluminum alloy doors and windows.
Second, the paint-free door. The door of the paint-free door is the door that does not need to be painted. It generally includes PVC, PU, ​​etc., and some polymer doors. Their advantage is that the price is low. The novel surface is smooth and bright, and the wood grain is clear and natural. Realistic, soundproof, heat-insulating, moisture-proof, never fade, many styles, with good impact resistance surface. The disadvantage is that the weight is light, mostly hollow, the grade is low, and the service life is not long. Choose according to your actual situation. This type of door can be used for general decoration.
Third, the solid wood door
Nowadays, there are two main types of solid wood doors. One is made entirely of solid wood, and there are domestically produced cheaper firs and pines. A good variety of wood species are walnut, sapele, eucalyptus and other wood species. This process wooden door should control the moisture content. However, the complete solid wood door is prone to deformation and cracking due to weather changes. In order to solve these problems, some wood splicing materials are used to enhance the mutual force to offset the deformation. The other is a solid wood composite door, which is a leather door. The base material is a solid medium frame with high medium density board. The surface is decorated with various beautiful solid wood veneers. The door is solid wood and has various styles, but the process is complicated and the cost is high.
Fourth, the choice of wooden door color
Generally speaking, the wooden door is more related to the furniture, wall paint and window cover dumb in the home. The association with the floor is relatively small. When the living room environment is warm, the warmer color can be selected for the wooden door, such as: sable, cherry, teak, Sapele and so on. When the living environment is cold, the wooden door should be lighter, such as mixed white, birch, etc.
The wooden door should be close to the color of the furniture, and should be as consistent as possible with the window cover dumb (the current set door is equipped with a matching window cover dumb, skirting board, corner line), and the color of the wall should have a corresponding contrast. For example, it is better to use a white wood door with a mixed oil to make the wall paint color. This will make the room layered, and not too "flat" will make the room feel particularly refreshing.
High Performance Stitch Bond Fabeic
High Performance Stitch Bond Fabeic,Anti-Bacteria,Stitch Bonded Fabrics,Polypropylene Stitch Bonded Fabrics,Agriculture Stitch Bonded Fabrics
yizheng jiayu textile products co.,ltd , https://www.jystitchbond.com