Increased economic and technical indicators of Yanhua Polypropylene plant after technical reform

In the past year, the economic and technical indicators of the first polypropylene plant of the Yanhua Polypropylene Business Unit after the transformation have been substantially improved. By the end of July, the total polypropylene output had exceeded 130,000 tons, and the number of product brands had exceeded 40. The material consumption and energy consumption indicators have been continuously declining. The output of special materials has increased substantially from nothing, and the technological transformation of installations has achieved remarkable results.

Due to defects in design and manufacturing, the P301 frequently malfunctions after the device is driven, which often causes the entire device to stop. Polypropylene Division organized technical personnel research and research on many occasions and carried out a bold transformation on its sealed purge gas system, eliminating this bottleneck. P304, P305 outlet pipeline is relatively narrow, often due to poor discharge and affect the device load. By carrying out structural improvements, the plant load has increased from the original design of 16.5 tons per hour to the current 20 tons per hour. When the polymerized unit is difficult to produce and has a high value-added random copolymer, it is likely to agglomerate, resulting in frequent stagnation of the granulation system designed for the slurry processing unit in the 1970s and even leading to polymerization shutdown. The technicians solved the problem of agglomerating by constantly adjusting the process and ensured the smooth operation of the device.

Most of the granulation system used in the transformation project of a polymer unit is an old one, and the new process does not match the old one, resulting in a large proportion of the output of the by-products. Polypropylene Business Unit's Powder Feeding System has a good history in the past 0 years. It's the best in the past 0 years. Load level.

The Polypropylene Business Division took full advantage of the gas phase process production process adopted after the transformation of the plant, and actively carried out the development and production of random copolymer special materials that were difficult to produce and had high added value. Through constant adjustment and optimization of the polymerization process conditions, especially adjusting the granulation process conditions, the granulation system can produce high ethylene content products, and has produced a number of random copolymer special product products and homopolymer special product products. At present, the number of product brands produced by this device has exceeded 40, and cumulative production of special materials has produced nearly 30,000 tons. The proportion of special materials has reached more than 35% in the first half of this year, which has created good economic benefits for enterprises.

PVA Cleaning Towel,microfiber towel for cleaning car,Once it dries up, simply rewet in the water, it is soft for cleaning again. Also it has been widely used as drying towel, 90% water absorb just in 3-5mints. Take it, just enjoy the cleaning with our pva Cleaning Towel.
material:PVA
size:30*30cm,35*40cm etc(customized)
Pattern:Plain Dyed

PVA Cleaning Towel

PVA Cleaning Towel,PVA Cloth,PVA Towel,PVA Cooling Towel

Shijiazhuang Tangju Trading Co., Ltd. , https://www.tangjutextile.com

Posted on